THE SOURCE FOR TECH BUYING ADVICE
A reliable leak-detection system. Epblogs goal is to be the tech side of trust. We are proud of our independence and of our D-Link Water Leak Sensor Kit (DCH-S1621KT) Review thorough testing methods, in which we take our time with a product. We regularly check our test reports for changes and thus keep them up-to-date over a longer period of time – regardless of when a device was released.guaranteed reviews. Trust our Epblogs comprehensive reviews. We tested the products over a longer period of time and were able to see how they cope with everyday tasks. This is how we help you to find the best product for your read our guaranteed reviews.
The D-Link Water Leak Sensor Kit is an expandable smart water detection system that alerts you to leaks and helps you avoid costly water damage repairs.
If a water leak is allowed to persist long enough without being discovered, it can do significant harm. You can monitor issue places underneath sinks and refrigerators, in laundry rooms, or anywhere else with the D-Link Water Leak Sensor Kit ($79.99), and you’ll receive warnings the moment a leak occurs.
If you currently use other D-Link products, the system is a solid choice because it works with many third-party smart home devices and notifications arrived swiftly in testing. However, the package is devoid of temperature and humidity sensors, and you cannot activate a water shut-off valve like you can with the Flo by Moen ($44.99), our Editors’ Choice winner for smart leak detectors.
D-Link Water Leak Sensor Kit (DCH-S1621KT) Design
The DCH-S1621KT is a two-part system that includes a battery-operated, long-range water sensor node and a plug-in water sensor hub (DCH-S162) (DCH-S163). Each DCH-S162 hub can couple up to 16 DCH-S163 nodes, which are available in packs of three for $85.49 each. A 19-inch water sensor cable, a 40-inch extension cable, an installation manual, and cable clips are all included in this set.
The system’s brain is the DCH-162. The white object has a two-pronged connector on the rear and measures 2.2 by 2.1 by 2.2 inches (HWD). A waterdrop-shaped LED indicator is located on the front of the sensor. It flashes green during pairing, glows green when the sensor is connected to your network, and glows red when it detects a leak. When the sensor senses water, a white strobe LED along the bottom edge also flashes. A 100dB siren and an 802.11n/g Wi-Fi radio are housed in the container.
The sensor cable is connected via the RJ-11 connection on the base’s bottom. The entire cable functions as a water sensor, so the hub will inform you if any portion of it comes into touch with water. But unlike the Phyn Smart Water Sensor and the Flo by Moen, this sensor does not track temperature and humidity.
The DCH-S163 sensor measures 0.75 by 2.5 by 2.5 inches (HWD) and has a waterdrop-shaped LED indicator that glows green when the device is paired to the hub, flashes red when it detects water, and remains unlit when a power-saving mode is active. It has four metal probes and a reset button on the base.
The sensor runs on two AAA batteries that you shouldn’t need to replace for up to five years; when they run out, simply remove the four screws on the base to replace them. The sensor communicates with the DCH-S162 hub over the 915MHz wireless frequency and boasts an indoor range of up to 300 feet.
The DCH-S1621KT does not work with Amazon Alexa or Apple HomeKit, but it does support Google Assistant and IFTTT. You can also configure it to trigger other D-Link devices such as the DCS-8600LH camera.
This kit notably cannot prevent further water damage by shutting off your home’s water supply like the Flo by Moen Smart Water Detector does. Granted, you must purchase an expensive Flo by Moen Smart Water Shutoff Valve ($767.70) to set up that feature, but this cost is relatively affordable compared with that of repairing floors, walls, or ceilings with water damage.
Leak Sensor Kit (DCH-S1621KT) App Options
The DCH-S1621KT kit uses the same mobile app (available for Android and iOS) as other D-Link devices including the HD Wi-Fi Camera (DCS-8010LH) and the Outdoor Wi-Fi Smart Plug.
Each sensor appears in a panel on the home screen that shows its current status. Tap the DHC-S162 panel to view the five most recent events and to enable the siren. Tap the gear icon in the upper right corner to edit the sensor name, view associated devices (nodes), add a designated contact, edit Wi-Fi settings, and update the firmware. Tap the DCH-S163 panel to view the sensor’s battery life, view the five most recent events, add a designated contact, and see the paired hub.
Back on the home screen, tap the overflow icon in the upper left corner to create scenes and automations, set notification schedules, add another node, and configure Google Assistant settings.
Easy Installation, Rapid Notifications
Installing the DCH-S1621KT is simple. Start by downloading the companion app and creating an account. Tap Add Device on the welcome screen and use your phone’s camera to scan the QR code that’s in the setup guide.
The DCH-S162 hub sensor should then have the wire attached to the bottom of it, and it should be plugged into an outlet close to the location you wish to monitor for leaks, such as a basement or laundry room. When the LED begins to glow orange, select Next, then hold on while the device connects to the app (around 10 seconds). To connect the sensor to your home Wi-Fi network, give it a name, and add a specified contact phone number that you can call with a single button press when the sensor activates, follow the app’s instructions.
To set up the DCH-S163 sensor node, tap the overflow icon in the upper left corner of the home screen, select Add Device, and scan the QR code on the bottom of the sensor when you get the prompt. Press and hold the button on the bottom of the sensor until the LED begins to blink orange, tap Next, and within a few seconds, the sensor pairs with the hub. Then, simply give it a name and place it on a surface you want to monitor for water.
In our tests, both sensors operated without issue. The moment the sensor cable of the DCH-S162 siren came into touch with a single water drop, the LED went red, and the siren started to chirp.
The 100dB siren was audible throughout the entire house. My Google Nest Hub also alerted me to the leak at the same time that I got a push notification. The DCH-S163 sensor produced the same results; it doesn’t emit sound, but the DCH-S162 siren sounds whenever any node triggers. An automation I made to have a DCS-8630 camera’s alarm and spotlight switch on when a node detected water worked as anticipated.
Leak Sensor Kit (DCH-S1621KT) Effective Water Detection
You can keep an eye on sections of your house that are prone to leaks with the D-Link Water Leak Sensor Kit (DCH-S1621KT) and avert expensive water damage repairs. When one of the sensors comes into touch with water, the system reacts immediately and is simple to install. Additionally, it supports Google Assistant and interacts with other D-Link devices. However, neither Alexa nor HomeKit are supported with the kit, and neither does it provide temperature or humidity readings.
The Flo by Moen Smart Water Detector is a better option if you need to monitor temperature and humidity in addition to water leaks. When used in conjunction with a Flo by Moen Smart Water Shutoff Valve, it can even turn off your water supply to assist stop further damage.